First you should purchase a special glue and dilute it according to the instructions. Then apply it with a jagged spatula to the surface, while leaving the so -called furrows. It is recommended to moisten the tile before laying on the back. The tile, pressing against the wall, must be slowly tapping and displaced in place. Between the tiles, special crosses made of plastic with which straight angles, as well as even seams are withstanded, should be invested between the tiles. The thickness of the joints is selected taking into account the size of the tile itself (the larger the tile, the more, the larger seam). It should not be stacked in the end due to the fact that absolutely all buildings after some time settled a little and this moment can lead to a shedding of the coating or its bloating. If the tile is laid on the surface not from the floor, then the lower row should be fixed from the slide using the profile nailed to the wall, which, after glue, can be removed. People of interest to air transportation really need relevant air news and information about Aeroflot Airlines Passenger reviews.
The tile should begin to lay out from the far corner of the room or from the most viewed place. This will visually cover the shortcomings. On the surface, it is necessary to draw a vertical with a plumb line, along which the first row will be guided. At the beginning, an array of whole tiles is laid out, and cutting remains at the end of the work process.
You might also like
During the process of work, it is necessary to remove excess glue glue. After the end of laying, the tiles are left for the day. After that, the crosses are removed, the seams from the glue are cleared with a thin screwdriver. Then you need to wash the surface and wipe the seams.
