When repairing the apartment, you can not ignore the doors between the internal rooms. After all, they are also an element of the interior. Any homemade craftsman will be able to change or update or update the doorways and doors, without resorting to the help of specialists.
For this, you should not make a lot and make a door box according to a simplified design, using overhead strips that are interconnected by nails.
You might also like
The door can also be made on a lightweight design consisting of frames. And here 2 options are offered: to conduct cladding over the bars of the frame or at the level with them. For door facing, as a rule, organite (fiberboard varieties), plywood, decorative layered plastic and t are used.P.
In any case, the door cladding should harmoniously fit into the overall interior of the apartment. Therefore, you should not stop at one sheathing of the door structure. Think, maybe the sheathing should be painted or sank, or supplement the door with some decorative elements (for example, thread or curly door handles).
For the interior door to absorb the sounds better, inside, between its cladding, sprouts of the fiber -varieties should be laid.
The door between the rooms can be made a continuous deaf, or you can glaze it. Glazing is performed both in the entire length of the door and partially – in its upper half.
Wide rails are stuffed along the door frames, to which the inner frame is attached. It is in it that the glass enshrined in the glazing. For glazing the door, you can use ordinary window glass, decorative glass, as well as stained glass. In general, everything that organically fits into the interior of the apartment.
For the strength of the rack design of the doors of them on both sides (below and from above), strengthened with steel corners.
