Choosing ceramic tiles for laying the floor, we can say with confidence that the result will be the strength of the floor and an attractive appearance. Such tiles are mainly laid out in the bathroom, toilet, kitchen, corridors. To lay the floor, only floor tiles are needed and it cannot be confused with wall, since there is a big difference between them, although outwardly they may look the same. But there is a difference: floor tiles are thicker wall and has a specially processed surface that does not slip when walking. In your free time you can find out how to install GLONASS.
Before starting work, it is necessary to check that the floor surface is dry, even and smooth. Concrete floors are best suited, but if they are wooden, then before they should be covered with plywood tiles of 12 millimeter thickness. Then the tile itself is laid out. You need to try to accommodate more than the whole tile, since the cut sides look less beautiful.
The next step is applied to one square meter in any of the corners of the room. Then the tile is applied and tightly crushed. Lay out with the center and move to the walls. After the glue dries, a special primer is sprinkled and then a solution is applied between the slots. The last step is to polish the surface to give a neat view.
Leave a Reply